What's The Reason Everyone Is Talking About Ghost Immobiliser Problems Right Now > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. It's discreet and does not require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be modified up to 20 times. This will then allow the startup of your vehicle.

Simple process to change the PIN code

With the growing rate of vehicle theft, a lot of owners are seeking to improve their security. There are a variety of aftermarket security devices available, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. While a tracking system can assist you in locating your car in the event of theft, it can not stop the crime from happening in the first place. Immobilisers, in contrast, do exactly what they state on the label - they disable your car's motor to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, Car ghost Immobiliser making it virtually impossible for thieves steal your vehicle.

The ghost device utilizes the buttons on your car to create a unique sequence that must be entered in order for the engine to begin. This can be done using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without having to use the button sequence. This option is particularly useful when you need to give your car away to a valet service or parking, as the immobiliser is activated and not disabled.

The Ghost is a very unique and ingenious device that works in conjunction with buttons of your car instead of being a separate device. This means it's not only a highly effective security measure against theft from your vehicle but it can also be transferred onto any other vehicles you own, making it more valuable than traditional steering wheel locks.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security device that protects your vehicle from key cloning, hacking and ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to bypass immobilisers.

The benefit of using CAN data is that it runs silently in comparison to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create a unique disarming sequence. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only start only if a valid PIN has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service or for maintenance without having to enter a PIN code.

Each vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable the system of your vehicle from running its normal start-up routine until you input an individual passcode. The system can be turned on or off via your smartphone's app without the need for extra wires.

Standard factory immobilisers in automobiles function through a transponder built into the key, which sends an indication to the ECU. The car will begin to start if the correct code is sent. If, however, the transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This enables the vehicle to start and be stolen. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It safeguards your vehicle from hacking, key cloning and even key theft. The only way a thief could take your vehicle is physically towing it away and car ghost immobiliser even then they would not be able to drive it.

Ghost uses buttons on your vehicle, such as the indicator stalk, steering wheel, and door panels, to create a unique PIN code that needs to be entered in order to use your vehicle. This is performed without the need for extra hardware such as a key-fob and can be as long as 20 presses long. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It is even more difficult to get rid of from a car alarm which requires disarming with a button sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your car after it's been taken.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos about cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original keys.

Our auto ghost immobiliser immobiliser combats this and provides you with an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN is entered along with your original key fob in order to prevent the engine from beginning. The unique override pin is located on a black card that you receive following your installation. It is easy to remember because there are no LED indicators.

The device is hidden in the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software which can identify what is a ghost immobiliser type of security systems you have installed. This makes it a great alternative to an alarm.

Contrary to other security systems which rely on a relay in the engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This enables them to shut down the vehicle completely with an electronic block of commands to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker to these systems, but this has to be specified prior to installing the device. They are also service/valet mode-compatible and a great alternative to a tracker if you are you are taking your car in for repair at the dealer.

Service/Valet Mode

In recent years there has been an increase in vehicles being stolen from owners without keys. It is more easy than ever to steal your pride & joy with the availability of key cloning tools and door lock picks. To stop this, we have launched the Autowatch ghost immobiliser installation immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your vehicle has been stolen.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent since it doesn't use radio frequencies or key fobs. This means it isn't detected by diagnostics or other car hacking devices. It also stops you from introducing a new ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is hidden in your car and is accessible via buttons on your steering wheel, the centre console and door panels. Before you can start your car ghost immobilisers immobiliser - simply click the following post -, you need to enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being driven away or started in the event that a PIN code hasn't been entered prior to. If you're driving away with the device in motion it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you don't enter your PIN code at this point, the indicator will continue to flash and will require a new PIN code every attempt to start your car.