Why Ghost Immobiliser Problems Will Be Your Next Big Obsession? > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. This system is discreet & does not require additional key fobs to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence up to 20 presses long. This then authorizes the vehicle to start.

Simple process to change the PIN code

With the increasing rate of vehicle thefts, many owners are seeking to improve their security. There are many different types of aftermarket security devices that range from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. A tracking device can aid in finding your car if it is stolen however it cannot stop the crime. Immobilisers, on the contrary are exactly what they say on the label - they disable your car's motor to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered in order for the engine to begin. This can be done using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This option is particularly beneficial if you have to give your car away for valet parking or servicing, as the immobiliser will remain activated and not disabled.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a standalone device. This means it's not only a highly effective security measure against theft from your vehicle but it can also be transferred over to any future cars you own, making it much more of an investment than a traditional steering wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security device that protects your car from key cloning, hacking & ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of using CAN data is that it runs silently in comparison to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console, or door panels, to create a unique disarming sequence. You can create a sequence that is as long as 20 presses to increase security. The iPhone app allows a single, authorised connection with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start if the correct PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set, such as 30mph speed limit) and, therefore, you can hand your car to valet or service without entering an entry code.

Each vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from running its normal startup routine until you input an individual passcode. The system can be activated or deactivated using your own smartphone app without the need for wires.

Standard factory immobilisers in vehicles work by having a transponder built into the key that transmits an indication to the ECU. If the correct code is sent, the car will start however, if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This enables the vehicle to start and be stolen. A South African company that is at the forefront of car security systems technology has developed the ghost immobiliser problems immobiliser. It shields you from hacking or key cloning, and even key theft. Only by physically towing your car away could a thief steal it, and they would still not be able drive it.

Ghost makes use of buttons in your vehicle, including the indicator stalk, steering wheel, and door panels, to create a unique PIN code that must be entered to use your car. This is done without additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code grabbing technologies to identify that the system has been set up.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be taken away or disabled by thieves and is also harder to remove than a car alarm that requires disarming via a button sequence. This makes it an excellent alternative to a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You don't have to look too far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle without the original keys.

The Ghost immobiliser was specifically designed to prevent this and provide you with an additional layer of security in order to protect your vehicle from being targeted by thieves. It creates a unique pin code sequence that is triggered by your existing buttons on the steering wheel, ghost Immobiliser problems door panel and centre console. The unique pin code must be entered in conjunction with your original key fob to stop the vehicle from starting. The unique override pin can be found on a black card that you will receive after your installation. It is simple to remember because there are no LED indicators.

The device is hidden within the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a great alternative to an electronic device for tracking.

In contrast to other security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems, however this must be stated prior to the installation of the device. They are also service/valet-mode compatible and a great alternative to a tracker you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent times, there has been a increase in the number of vehicles stolen without the owner's keys. With the ease of access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to take your prized possessions. We have created the Autowatch ghost car immobiliser Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop called CAN. It's completely quiet since it doesn't use radio frequencies or a key fob. This means that it can't be detected by diagnostics or any other car hacking devices. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system as only the correct PIN code can allow the engine to start.

The device is hidden inside your car and is accessed by existing buttons on your steering wheel, the centre console, and door panels. Before you can begin your car, you need to enter a unique and reversible PIN code that can be as long as 20 digits.

This is the very first aftermarket CAN-bus immobiliser for the market that has been created. It can prevent your vehicle from being driven or started if you don't enter a PIN code before entering. If you are driving away with the device arming the indicator will flash on your dashboard and flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function normally. If you do not enter your PIN at this time the indication will continue to flash and will require a new PIN code for every attempt to start your car.