Fireproof Sandwich Panel factory > 자유게시판

Fireproof Sandwich Panel factory Metal carved panel made of fireproof panel material
The metal carved board uses fireproof panel material, and its combustion performance level is higher, which can reach B1 level. Referring to the relevant standards of GB/T8626, according to the experiment, the fireproof paneling will not cause the filter paper to be ignited by burning drippings. Referring to the relevant standards of GB/T8625, according to the experiment, the average residual length of the metal carved panel group is greater than 15 cm, and the average temperature peak of the flue gas is within 200 鈩? Referring to the relevant standards of GB/T8627, according to experiments, the smoke density rating (SDR) of the metal engraved board is below 75. The data is an effective proof of the combustion level of the metal carved board, so the metal carved board can also be called a fireproof metal plate. Its application has played a very good role in improving the fire resistance and fire resistance of the wall.
Product advantages
The metal plate made of fireproof board is made of galvanized steel plate with special surface treatment, the middle layer is rigid foam polyurethane as the insulation layer, and the inner layer is composed of three parts of aluminum foil. Metal engraving has the following advantages:
1. Thermal insulation, energy saving and energy saving:
Aluminum fireproof panel have excellent thermal insulation properties. Compared with traditional exterior wall thermal insulation decorative building materials, they have excellent cold resistance and thermal insulation properties. Heating and cooling energy consumption is greatly reduced, thereby saving energy bills. The product is cost-effective.
2. Easy installation and cost saving:
The installation method of fireproof external cladding panels is simple and fast, and is not limited by seasonal climate and geographical environment, and is suitable for all year rounds. The significantly shortened project cycle not only speeds up the project progress, but also saves construction costs and reduces the overall cost. While achieving the effect of decoration and thermal insulation, the fireproof panel for wall minimizes the load of the external wall and enhances the availability of space and land.
3. Lightweight and land-saving, shock-resistant and crack-resistant:
The 3d fireproof wall panel is light in weight, high in strength and good in impact resistance. Its light weight not only reduces the burden on the building itself, but also greatly reduces the impact of earthquakes on the building. The board is installed on the light steel structure building, with strong integrity, shock resistance, crack resistance, firmness and safety.
4. The board is flame-retardant, waterproof and moisture-proof:
The fireproof Pu foam panel has been specially treated, which has good flame retardant performance and is safe and worry-free.
Traditional exterior wall decoration materials generally have substrate degradation caused by water and cold penetration, which leads to problems such as water seepage on indoor walls. The excellent structure of the exterior wall insulation and decoration integrated board and the compact concave-convex plug-in groove type installation method between the boards avoids the structural damage caused by the cycle of rain, snow, freezing, thawing, dry and wet, and eliminates the wall after installation. The worry of water seepage on the surface effectively avoids the phenomenon of mildew on the indoor wall. Even in severe cold areas, the exterior wall thermal insulation and decoration integrated board with stable performance has no worries of water seepage and deformation, which prolongs the service life of the building.
Product Parameter
Product application
Fireproof wall panel can be widely used in municipal construction, apartment houses, office halls, villas, garden attractions, renovation of old buildings, guard booths and many other engineering fields. The building materials are not only suitable for newly-built brick-concrete structures, frame structures, steel structures, light-body buildings and other types of buildings, but also for the decoration and energy-saving renovation of existing buildings, as well as indoor and outdoor decoration. External wall insulation and decoration integrated board is becoming the first choice for more and more wall insulation and decoration building materials.
Product installation
Fireproof Pu foam panel are widely used now, so how should we install them before using them?
1. The main frame structure has been completed, according to the design requirements, according to the actual situation on site, measure, draw the layout diagram, and process the wall panels;
2. Before installation, the installation construction plan or operation instruction should be prepared, the construction plan should be approved by the chief engineer of the group company, and the operation instruction should be approved by the technical director of the branch;
3. Before the installation of the wall panel, the technical disclosure should be made step by step according to the construction plan or operation instruction, and the disclosure and the person to be disclosed should sign on the disclosure record;
4. The aluminum fireproof panel wall panels have been transported to the construction site, stacked according to the number, and the wall panels are checked and checked according to the design requirements and specification requirements, including the quantity, specification, model, thickness, appearance quality, etc. should meet the requirements. Wall panels that do not meet the requirements should be returned immediately, and the use of substandard products in projects is strictly prohibited;
5. Find the elevation according to the design requirements, pop up the horizontal line on the inclined beam, accurately locate the embedded parts according to the layout plan of the wall panel manufacturer, find the center line of the embedded parts, and play the line;
6. Check the quantity and specification of chemical anchor bolts, steel plates and angle steels, which should meet the requirements of continuous installation;
7. The mechanical equipment used for wall panel installation has entered the construction site, and has been inspected, repaired and maintained, and is in good condition. The tools required for wall panel installation have been prepared.
Product maintenance method
1. The bottom surface of the means of transport must be flat. After horizontal loading, the carved board should be fixed to avoid damage to the product due to excessive binding of the carved board during fixing; reduce vibration during transportation to prevent collision and rain. The environment where the carved panels are placed should be ventilated and dry, and the site must be flat and solid.
2. When handling the carved panels and loading and unloading the carved panels, the metal carved thermal insulation panel manufacturers should take the length direction of the panels as the stressed edge, and handle them carefully to avoid collision damage and damage to the panels; when handling a single panel, the panels should be transported upright. In order to avoid deformation of the plate.
3. When using square wood support pads, it should ensure that the product will not be deformed; when placed in the open air, the carved board should be completely covered with a waterproof cloth; when the metal carved insulation board manufacturer stores the carved board, it should be kept away from high temperature and high humidity areas, and must not be mixed with oil and oil. Chemicals and other corrosive materials are mixed and stored. When opening the engraved board package, it should be placed flat, then opened from the top of the product package, and the board will be taken out from top to bottom.
FAQ
1. Who are we?
We are based in Shandong, China, start from 2018,sell to North America(40.00%),South America(20.00%),Oceania(20.00%),Africa(10.00%),Northern Europe(2.00%),Southern Europe(2.00%),South Asia(2.00%),Eastern Europe(00.00%),Southeast Asia(00.00%),Central America(00.00%),Domestic Market(00.00%). There are total about 51-100 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Metal Wall Panels,Metal Insulation Board,Fireproof panel material銆丮etal Wall Siding,Metal Insulated Panel,fireproof panel material
4. Why should you buy from us not from other suppliers?
Jinan Dibaier environmental protection materials Co., Ltd. is a high-tech enterprise, which includes the design, development, manufacture, sales and service of the products such as metal carving board, active room and sentry box.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF锛?/p>
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union;
Language Spoken:English,ChineseFireproof Sandwich Panel factory
website:http://www.dibaier-panel.com/sandwich-panel/fireproof-sandwich-panel/