See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This will then allow the vehicle to start.

Simple process to change the PIN code

With the growing rate of vehicle theft, many owners are looking to improve their security. There are a myriad of aftermarket security devices available from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking device can help you find your car in the case of theft, it can not prevent the crime from occurring in the first in the first place. An immobiliser, on other hand does exactly what it says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to take your vehicle.

The ghost device uses the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This is especially useful if you need to hand your car over for valet parking or servicing because the immobiliser will remain activated and not disabled.

The Ghost is an innovative and unique device that operates with the buttons of your vehicle instead of as a standalone unit. This means that it's not just a powerful protection against theft of your vehicle, but can also be transferred onto any other vehicles you may have, making it more investment-wise than traditional steering wheel locks.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that protects your vehicle from key cloning, hacking and ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be fitted into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, Ghost Immobiliser Problems centre console, or door panels, to create a unique sequences for disarming. The sequence can be extended by 20 presses to provide additional security. The iPhone app permits a single, authorised connection using the pairing code unique to the Ghost and the communication between the two is secured.

The ghost immobiliser for sale also prevents car thieves from adding a new key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start if the correct PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with parameters set, such as 30mph speed limit) which means you can hand your car to an attendant or valet without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a customized code. The system can be turned off or on through your smartphone's app, without the need for extra wires.

The standard factory immobilisers work by using a transponder, which is built into the key. This sends a message to the ECU. If the correct code is transmitted, the car will start, but if a transponder is replaced with one from another vehicle the immobiliser will not recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It protects you from hacking or key cloning and even key theft. The only way thieves could take your car is physically towing it away and even then, they wouldn't be able to drive it.

auto ghost immobiliser makes use of buttons on your vehicle, like the indicator stalk, steering wheel, as well as the door panels, to create unique PIN codes that must be entered in order to use your vehicle. This is done without additional hardware, like a keyfob. It can take up to 20 presses. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are unable to utilize sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is covertly integrated into the vehicle, so it cannot be disabled or removed by thieves. It's even more difficult to get rid of than a car alarm that requires disarming using the use of a button sequence. This makes it a fantastic alternative to a GPS tracking device, which can be used to locate your vehicle after it's been taken.

Override of emergency PIN code

You don't have to look long on social media sites to find stories or videos of vehicles that were stolen using the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle without your original keys.

Our Ghost immobiliser is specifically designed to prevent this, and give you an extra layer of security to protect your vehicle from being targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN has to be entered in conjunction with your original key fob in order to stop the vehicle from beginning. The unique PIN for override is on the black card you will receive following installation and is easy to remember as there aren't any LEDs.

The device is hidden inside the vehicle's wires, and does not emit radio signals, therefore it isn't able to be identified by modern criminals with diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to an alarm.

In contrast to other security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to block a vehicle completely by sending a digital block to the ECU and engine.

These systems can also be linked to a separate alarm immobiliser, tracker or alarm. This should be specified prior to installation. They are also fully service/valet-mode compatible and a good alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealership.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen with the owners' keys. It's now more easy than ever to steal your pride and joy thanks to the availability of key cloning devices and door lock picks. To prevent this from happening, we now offer the Autowatch Ghost immobiliser Problems immobiliser that prevents your vehicle from being driven even if your keys have been copied or your vehicle was stolen.

It communicates directly with your car's ECU (Engine Control Unit) through the data loop of CAN. It is completely silent, because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects the user from using an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden within your car and is accessed by existing buttons on your steering wheel, the centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits needs to be entered before you can start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being started or driven away if a PIN code isn't entered first. If you're driving away with the device in motion the indicator will flash on your dashboard that will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and require a new PIN every time you attempt to start your car.