Learn More About Door Repair While Working From Your Home > 자유게시판

Door Repair - Simple Fixes You Can Do in a Few Easy Steps

It's easy to think a door is beyond repair, there are many simple fixes that can make a huge difference. Let's begin with shifting.

To shim a door open the door and press it against the frame. Utilize a jack plane or block to remove small pieces of wood from the binding points.

The Frame

The door [Redirect-302] frame is an essential component of your home. It protects you from water damage and gives your home a beautiful appearance. But it's also prone to being damaged. Weather-related damage or burglaries, or just regular use, door frames could become damaged. If they do, this can result in massive holes, a poor latching system, and an unattractive appearance. Fortunately fixing your door frame is a simple process that can be completed in a few steps.

The first step is to take the trim, or molding, from the door's opening. This can be accomplished with a hammer and chisel or a power saw. After the trim has been removed, make a note of its measurements so you can replace it once the repair is completed.

The next step is to inspect the door frame for any areas that are rotted or damaged. If you find any rotten wood, you'll need to replace it. These are usually available at your local hardware store and should be made from an material that is compatible with the rest of your door frame. It is recommended to avoid using pressure-treated wood, as it tends to warp and twist over time.

After replacing any rotten components of the frame you will need to secure the frame in place. This can be accomplished using a shim. A shim is a piece of material that is placed between the frame and wall. The shim will add support for the frame and prevent it from moving.

Once you have replaced any shims, it's recommended to seal around the double glazing glazed door repairs - Learn Additional Here - frame and sill. This will help keep water damage from occurring and protect the frame from pests.

You will then need to put your trim back on the door frame. If you're lucky enough, the old trim might be in good condition and you can just attach it to the frame. If not, you might have to buy new trim and follow the same process.

The Threshold

A threshold is a strip of wood that is used to cover and protect the space between the door and floor. It also prevents snow and water from building up in the entrance. A properly installed threshold is not just a vital part of your door, but also an attractive accent to improve the curb appeal of your home. If your threshold is scratched, worn or damaged, it's the right time to replace it. The process of replacing your threshold is not as easy as slipping it into the casing and nailing it to the frame; it has to be held up by a series of wood strips, called shims. They are placed between the frame's two jambs.

To remove the threshold first, cut it off from the door's sides frame with circular saw (use a carbide blade, if possible). If you can, remove the sub sill, which is the portion of the frame that is below the threshold. Replace it if it's decaying while you replace the threshold.

Before cutting the threshold to the proper size, use a carpenter's square to mark the lines of layout on it, and note right angles for notches that will fit around the jambs. You can also purchase thresholds that are pre-cut to match the dimensions of your doorway in a home center.

Install the shims evenly, and make sure you space them. If necessary, you can alter the thickness of the shims. But they should not exceed 1 1/2 inches. It might require some trial and error to get the threshold just right, but still in a position to move freely.

Check the suitability of your new threshold by closing the door and testing how well it closes and opens. There shouldn't be any daylight under the door and the sweep at the bottom of the door should hit the top of the threshold.

If the threshold fits well but requires some additional support, apply construction adhesive to the shims prior to pressing them down under the threshold. Repeat the process with more shhims until you have a tight fit that is able to withstand weight.

The Hinges

A lot of hinges for doors become rusty or degrade over time, making it harder to close the door. It is important to fix the hinge so as to shut and secure the door in a proper manner. If you're replacing the hinge make sure you choose the same hinge that is a good match in terms of size and edge shape. You should also make sure the hinge is positioned correctly in the mortise and door jamb.

Check the hinge to determine whether it is in a loose state. If the hinge is loose it will likely to be snagged along the door's frame and rub against its strike plate. Examine for scratches in paint or indents on the frame to identify the location where the hinge is rubs. If the hinge is not sufficient tight then tighten it up using the help of a screwdriver. If the hinge remains too loose, you may need to replace it. You can put to put a shim between the door frame, and the hinge.

You can straighten the hinge knuckles by bent them using a pair of large tongue-and-groove pliers or an adjustable wrench. You can bend the knuckles with the help of a large pair of tongue and groove pliers, or a reversible wrench. It's best to work on one at each time, to ensure that you don't end up bending out the hinge leaf.

It is also possible that the screws holding your door hinges in place are loosened. If this is the case you can replace the screws to provide them with more grip on the hinges.

If the hinge isn't damaged and the screw holes are not damaged you can use a syringe to inject carpenter's glue into joint and mortise of the hinge. Then screw the hinge in the frame, and fix it with the screwdriver or drill. If you're putting in new hinges, it's best to mark the locations of the pilot holes on the door and the frame of the door so that you can be certain to place the screws in exactly the same place as the previous ones.

The Hardware

Many people don't think much about door knobs, levers and locksets until they stop functioning properly. The majority of these parts are easily repairable. It's usually a matter of selecting the best piece to match the style and design of your home, and installing it. It's a good idea especially for exterior doors to include weather-stripping.

You may be able solve the issue of a door that's difficult to open by lubricating your lock assembly. Many door handles, hinges and locks may become stuck when their wear surfaces get dirty or dry. Cleaning these parts and keeping them lubricated is a cost-effective method of ensuring they function correctly.

Some of the most common issues with door hardware are loose or broken handle screw or a lock that won't turn on its own when you use hinges that are squeaky or squeak. In the majority of situations you can tighten these screws or replace the screw entirely. However, in certain situations, it's better to remove the lock or handle from the door and then sand the spindle, lock cylinder bore hole, and escutcheon holes to ensure that they are clean prior to installing the new hardware.

If you have doors that are difficult to close, it might be necessary to grease its locking mechanism with penetrating oil. For hinges that are squeaky, you can remove and clean the hinge pins, then replace them with longer screws that are more likely to hold.

If you're replacing a lock, handle or hinge, ensure that the lock you select is compatible with the hole size of your door and jamb. This information is usually found on the packaging or the manufacturer's website. For example deadbolts require an opening of 1 1/2-inch or 2 1/8-inch diameter, and doorknobs and levers require holes that have an varying spread (the distance between the center of the knob and the lock holes). You should also check the backset of the replacement double glazing as this is what determines whether it will fit your door.