This Is The Ghost Immobiliser 2 Case Study You'll Never Forget > 자유게시판

ghost immobiliser fitting near me Immobiliser 2

Protects your vehicle against key cloning and prevents thieves from driving it with original keys. Our latest immobiliser is connected to the CAN data network in your vehicle and a unique PIN must be entered to start the engine.

Ghost, unlike trackers, does not emit radio frequency signals and can't be detected by diagnostic tools. It also has no indicators in the form of LEDs or buttons that give the impression that it is in your car or van.

Anti-key cloning

The Ghost immobiliser was developed to stop key cloning. This device connects with your vehicle's CAN data network and creates an unique pin code using the factory buttons in your dashboard and steering. This prevents thieves from being capable of starting your car. If the incorrect PIN is entered it will prevent your engine from running and making it impossible to drive off with your pride and Joy.

Ghost immobilisers use an innovative technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut or taken The ghost immobiliser is an invisible electronic device that cannot be detected by common thieves since it doesn't emit radio signals and works silently.

This next generation immobiliser is equipped to shield your car from a myriad of threats, including key-hacking, cloned keys and relay attacks. It also stops a thief adding a key or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require any additional key fobs or remotes to operate. It can be turned off using an app on the driver's smartphone. This is ideal the time you have to give your car away for valet parking, or maintenance without key fobs.

The Autowatch ghost ii immobiliser-II represents the latest version of the Ghost immobiliser. It was designed to be as simple and user-friendly as is possible, yet remains as secure as ever. This is achieved by linking the Ghost-II into the vehicle's data network CAN, meaning that there are no wires to hide or be easily located. It also has an integrated feature that allows you to disarm your Ghost-II by connecting it to the vehicle's Bluetooth, so you can go out and drive hassle free.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves are able to access your vehicle's OBD port with nothing more than a laptop, an app and a few cables, which can be purchased on the internet for under PS50. Once they have access, they are able to do anything they want to do, from resetting your vehicle's fault codes to tuning your vehicle, or stealing it within a matter of minutes.

It will protect your car from being taken away by requiring a unique PIN code to be entered with your key fob before you start the engine or leave. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any scan or code grabbing technology. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You'll also require a cable with OBD pins, which are connected to the CAN bus. These cables can be found on Amazon/Ebay for around PS50. You'll also require cables with OBD pins that are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. You then need to splice the cable into the wire harness of your vehicle, for example, in the radio wiring harness.

Once the hacker has access to the OBD port on your vehicle, they are able to send diagnostics to the system with high baud rates, ghost immobiliser 2 which will crash the car's CAN and prevent the systems from working. This could cause the engine to stall or even lock doors, and even the brakes to be engaged.

No need for additional remotes or key fobs

A car immobiliser is great piece of anti theft technology used by billions of modern cars all over the world. An aftermarket immobiliser safeguards your vehicle with engine ECU software that stops cars from starting when a false transponder is transmitted.

However, it can be simple for a burglar to bypass an immobiliser system if they have access to the code to deactivate it. The battery inside most key fobs can be easily removed by prying it open which means that a burglar could employ a simple tool take out the immobiliser's circuit board and replace it with the blank. Then, they will be able to start your vehicle.

The TASSA approved ghost ii immobiliser 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done by a discrete and silent data loop in the CAN which cannot be detected by diagnostic tools like the ones used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicators, so it's not visible.

There will be times when you need to deactivate Autowatch Ghost 2's auto-protection for example, when you are doing an valet parking or a servicing. The ghost CAN immobiliser has a special mode for this, called "Service Mode that can be activated with the touch of a button on your smartphone. The vehicle can still be operated however, its maximum speed will be restricted to 36mph for greater security.

Contact us today to schedule a demonstration at our workshop. A member of our team will run through the entire process of how the system works and will provide you with owner's manuals, installation certificate, Ghost 2 emergency card and security guarantee.

Simple PIN code Change Process

Ghost is a next-generation device that can secure your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to your vehicles CAN data network and a unique PIN code is programmed into it using buttons on your steering wheel & dash. The system stops engine start and can't be re-enabled since no RF signals are emitted from the device. This makes it impossible to be detected using sophisticated scanning and RF techniques employed by modern thieves.

The PIN code sequence can be changed whenever you wish to lock out previous drivers. It even comes with an override code in the event of a sequence that is not remembered. The installer will show you the process to do this during installation. The system has a valet-mode feature that allows you to temporarily disable pin input sequences so that the garage or mechanic can work on the vehicle without having to know the code. This is ideal for those who want to give their vehicle for valet parking or service but don't want to divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs to operate, ghost immobiliser birmingham is a discreet system that uses the buttons in your vehicle to create an unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone. No extra LED indicators are used, and your vehicle is protected without possibility of being disabled.

Tested for every vehicle

A ghost immobiliser, unlike key fobs which require pressing buttons, is discreetly placed under the dash or steering wheel. It is not obvious that it's there. The device is connected to your vehicle's CAN network and a PIN code can be programmed by using the buttons on your car. The system will then stop your engine from starting unless the code is entered prior to. This means that thieves are unable to copy the keys to your car or use the OBD to hack into it.

Ghost can be utilized in all vehicles including electric cars motorhomes, vans, and bikes. It's also incredibly versatile and can be programmed to turn off in a variety of situations. For example, it can be programmed to go into Valet mode when the vehicle is being taken to a valet parking or servicing company. This allows you to drive your vehicle within a speed limit of 30 mph, and the ghost immobiliser cost immobiliser will turn on itself when your vehicle returns to your possession.

Another excellent feature is that the device can be reset to the personalized PIN code at any time. This is great if you lose the code or in the event that the device becomes unusable.

It's also worth noting that the device is undetectable to anyone who isn't familiar with it. This is due to it running through existing buttons on your car's dashboard and steering wheel and utilizes the information they send to recognise the button that was hit. This makes it a completely secure and reliable security system that isn't affected by jamming, RF scanning or door lock pick sets.