Check Out What Ghost Immobiliser Problems Tricks Celebs Are Making Use Of > 자유게시판

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. It's discreet and does not require any additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then allow the start-up of your vehicle.

Simple process to change the PIN code

Many owners are upgrading their security due to the increase in vehicle theft. There are a variety of security products that are available, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your vehicle. A tracking system can help you locate your car ghost immobiliser if it is stolen however, it won't stop the crime. An immobiliser, on other hand, does exactly what is a ghost immobiliser it says on the label: it shuts off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done via the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This option is particularly beneficial if you have to hand your car over to a valet service or parking because the immobiliser will remain activated and not disabled.

The Ghost is an unique and innovative device that works with the buttons of your vehicle instead of as a standalone unit. It is not only an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you may own. This makes it a much better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your pride & joy from key cloning and hacking. It also prevents ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be plugged into the vehicle without the need for extra wiring and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices which is a common technique used by car thieves to circumvent the immobilisers in place.

The advantage of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technology as well as recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, like the steering wheel, centre console or door panels, to create unique sequences for disarming. You can make this sequence up to 20 presses long to provide additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The auto ghost immobiliser (check) prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine will only start if a valid PIN code is entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as 30mph speed limit), so you can give your car to a valet or service without needing to enter the code.

Tested for each vehicle

The Autowatch ghost 2 immobiliser fitting near me is the world's first aftermarket CAN bus immobiliser that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals that block the system of your vehicle from running its normal startup routine until you input the passcode you have created. The system can be activated or deactivated by using your smartphone app without the need for additional wires.

The standard factory immobilisers function with a transponder which is built into the key. It transmits a message to the ECU. The car will start when the correct code is sent. If, however, the transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It safeguards your vehicle from hacking, key cloning and even key theft. Only by physically towing your car away from thieves could they get it and not be able drive it.

Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique PIN sequence that can be changed that needs to be entered before you can use your car. This is performed without the need for extra hardware such as key fobs and can last up to 20 presses long. It is also unrecognizable to diagnostics equipment and does not transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.

Ghost is more difficult to remove than car alarms, which require disarming by pressing a series of buttons. This makes it an excellent addition to a GPS tracking device that can be used to track your vehicle after it's been taken.

Emergency PIN code override

You do not have to look long on social media sites to find stories or videos of cars that have been stolen with the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle with your original keys.

The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. The unique pin code is entered in conjunction with your original key fob to prevent the engine from getting started. The unique override PIN can be found on the black card you will receive following your installation. It is simple to remember as there are no LED indications.

The device is hidden in the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine the type of security system you have installed. This makes it an excellent alternative to an alarm.

In contrast to other security systems that have a relay inside the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand Auto ghost immobiliser dependant). This allows them to block a vehicle completely by sending a digital block to the ECU and engine.

These systems can also be linked to a separate alarm, immobiliser or tracker. This should be decided prior to installation. They also work with valet/service modes and is a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical issue.

Service/Valet Mode

In recent times, there has been a increase in the number of vehicles being stolen with no owner's keys. With easy access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your prized possessions. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car was stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or keys fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also protects the user from using a new ECU or key to bypass the system, as only the PIN code allows the engine to start.

The device is hidden inside your car using existing buttons on the steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique and reversible PIN code that can be as long as 20 digits.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being moved away or even started without a PIN code being entered prior to. If the device is armed and you try to drive away, it will display a warning on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point it will disable the anti-hijack and your car will continue to drive just as normal. If you do not enter your PIN code at this point, the indicator will continue to flash and require a new PIN code every attempt to start your car.